© 2018 by Eberle Fluid Technology. 8651 Highway N, Lake St. Louis, MO, 63367.     1-877-632-3753

CLEAN LUBE VO

DESCRIPTION

CLEAN LUBE VO vanishing oil is formulated to provide lubricity and EP (extreme pressure) for stamping, drawing, forming, slitting and blanking operations while leaving only a slight residual film. The time necessary for a dry part is approximately twenty minutes depending on residual film thickness, temperature and humidity.
CLEAN LUBE VO vanishing oil may be used on ferrous and non-ferrous metals as well as most sensitive finishes and pre-coated stocks. For more difficult operations contact your sales representative.

BENEFITS

  • Clean parts- eliminates costly cleaning and disposal operations required with conventional oils.

  • Stays on the part through the stamping operation, then evaporates.

  • Non-staining.

  • Reduces contamination of parts cleaning systems.

  • Applied by brush, roller, or spray.

  • Low viscosity minimizes carry-off on parts.

TYPICAL PROPERTIES

APPEARANCE

(CONCENTRATE)

ODOR

SPECIFIC GRAVITY

(CONCENTRATE)

FLASH POINT

EFFECT OF

FREEZE/THAW CYCLE

Liquid, Light Amber

Mild,

Petroleum

0.86 (± 0.01)

>152˚F (COC)

Stable

SIZES AVAILABLE

  • Case of 4 x 1 gallon jugs

  • 5 gallon pails

  • 55 gallon drums

  • 330 gallon totes